How To Slipstream Drivers Into Windows Xp

One of the major problems that has plagued Windows XP is it's never had the facility to install itself onto some newer hardware without the demand for extra steps. Although SATA, AHCI and RAID enabled storage controllers have been around for several years, the Windows XP install CD never gained the ability to install straight onto this hardware, and you need a floppy disk with the necessary drivers for XP to be able to recognize your hard drives during setup. If you don't use a driver floppy, you will get the dreaded "Setup did not discover any hard deejay drives installed in your computer" error.

Download a floppy SATA/RAID commuter, extract it to floppy disk and and then when installing XP, you need to press F6 at the specified time to install the driver. However, nigh desktop computers and all laptops don't come with a floppy drive these days, and what makes information technology worse is yous cannot use annihilation else such as a USB stick to put the drivers on, information technology MUST be a floppy drive. Although you can apply an external USB floppy drive, it would exist a waste to buy one simply to use it for installing Windows XP. Recently we plant a workaround that tin enable you to install the SATA drivers from a USB flash drive later on pressing F6, but this solution is known to exist not 100% working on all computers.

In order to become around having to utilise a floppy bulldoze, yous tin integrate the floppy SATA/RAID driver into the Windows XP CD yourself. This way, you can install Windows XP on a SATA hard drive without using a floppy drive at all because the driver is already present on the CD. You'll need to have an XP CD or the source files contained on one stored on your hard drive, the floppy SATA/RAID driver which tin can be downloaded from the motherboard manufacturer'southward website and a CD/DVD author.

Here are 2 ways to integrate the SATA drivers into your Windows XP CD allowing installation without the need of a floppy drive.

1: Integrate SATA drivers using nLite

This first method uses the update and driver integrating tool nLite to add the drivers to the Windows XP CD. Simply about everyone looking to customize their Windows XP install CD has heard of this tool.

1. Download and install nLite.

2. Download the SATA driver from the motherboard or laptop manufacturer's website and excerpt it to a new binder. Alternatively, you might be able to download a newer driver from the SATA or RAID chipset manufacturer such equally the drivers from the Intel website for their chipsets. Brand certain to get a standalone floppy driver if available or a commuter package that includes a floppy commuter.

3. Run nLite and select the language to use. Next y'all need to specify where the Windows XP installation files are. If you already take a folder on you hard drive with the XP CD contents, point to that. If non, insert your XP CD and browse to your disc's drive letter, select a folder location for it to save to and and then wait for it to copy. Click Side by side once washed, and Next once more to skip the Presets screen.

4. At Task Option, click Drivers and Bootable ISO. Click Next.

5. Now click the Insert button at the lesser and select "Multiple driver folder", cull the folder where the extracted drivers are and click OK. If there are multiple choices, select the right drivers to integrate. For case, practice not select 64 scrap drivers on a 32 chip Windows XP. Click OK when done selecting the drivers. Click Side by side.

half-dozen. If this next screen doesn't appear, yous don't have the correct driver. The driver needs to exist of a Textmode blazon and not a PNP type to be included in the XP setup. Make certain Textmode driver is the selected mode and to cull the verbal blazon of hardware chipset in your system. If you're not certain, check the documentation or the manufacturers website. For our hardware below nosotros desire the Intel ICH9R chipset. Select the drivers you require and click OK and then click Side by side, and finally OK to outset the process.

7. Once the integration has completed, click Next to be taken to the ISO creation and called-for screen. You can create a bootable ISO to burn to CD afterward on, or even burn down to CD straight using Directly Fire option. To create and save an ISO simply click the Create Image mode choice and and so Make ISO. With the assist of an ISO file, you could then install Windows XP from a USB flash drive.

The adjacent integration method on folio two is far easier to become working if you lot can't notice the correct floppy SATA/RAID driver because it makes a universal SATA Windows CD.

Source: https://www.raymond.cc/blog/how-to-integrate-floppy-sata-raid-driver-into-windows-xp-cd/

Posted by: gardnersuchibiant.blogspot.com

Share this post