How To Clean A Ps4 Fan Without Taking It Apart
The PlayStation 4 is a remarkable device, notable for its precipitous edges, rhombus-similar contour and minuscule size. But with that super-small footprint comes one serious drawback. The ducted fan tends to trap grit, and after a while, information technology will accept to spin ridiculously fast to proceed your arrangement cool.
A fast fan is a loud fan, and the fan inside the PS4 — particularly the original model released in 2022 — is about as loud as they come. Fixing the problem is surprisingly simple, peculiarly if you have a newer PS4 Slim or PS4 Pro.
(Notation: Sony explicitly states, in no uncertain terms, that disassembling your PS4 will void its warranty. Equally someone who has had their original PS4 repaired under warranty, I value that service. Continue at your own risk.)
:no_upscale()/cdn.vox-cdn.com/uploads/chorus_asset/file/11900791/Screenshot_2018_07_30_10.22.49.png)
If your PS4 is already out of warranty, you don't have a whole lot to lose. Also, the PS4 Slim and the PS4 Pro both feature easy-to-remove plastic cowlings, and so y'all might be able to take care of that dusty fan without really "disassembling" anything.
But we'll become to that.
Original PS4
Cleaning the fan on the original PS4 is the about troublesome of the bunch. First, you'll need to get a special screwdriver.
It's called a T8 Torx bit, and you lot'll need the security version with a little dimple carved into business end of information technology. The Torx nuts on the back of your PS4 accept a small protrusion in the center, and without the dimple on a security bit you're only not getting them out. These bits are nearly certainly available at your friendly local hardware shop, or for a pittance on Amazon.
Once yous have the correct bit, get ahead and unplug all the cables from your console. Place it on a clean, flat, smooth surface that's unlikely to ding or gouge the cease and turn it effectually. On the dorsum, along the bottom of the panel, you'll need to remove three screws. They're the just screws on the back of the PS4 that are located on the bottom half of the device, and they volition likely be obscured by big blackness stickers.
:no_upscale()/cdn.vox-cdn.com/uploads/chorus_asset/file/11900905/PS4_screw.jpg)
Note that in one case yous take those stickers off, you've basically voided your warranty. In my case, I'1000 already most iv years out of warranty so I'm not terribly concerned.
Back those screws out and put them in a safe place. So, flip your PS4 upside downward and remove the bottom plastic cowling. You lot'll exist able to easily tip it upwardly from the back, sliding it frontward slightly to get clear of some sharp edges and wires on the forepart stop.
You're basically done at this signal. The fan is exposed, so hit it from every angle with some canned air. Take special intendance to as well clean out the grills along the left and right side of the panel as well.
When putting things back together, be aware that the screws go in perpendicular to the angled backside of the PS4. Supervene upon them gingerly, or you lot'll likely strip the threads. Once you've buttoned everything back upwards, you're good to become.
PS4 Slim and PS4 Pro
The latest iterations of the PS4 do not require tools to clean the fan. It'south all based on brute force.
Again, unplug your PS4 and place it on a make clean, flat, smoothen surface. Face the console away from you, grasp the bottom front of the panel'southward superlative plastic cowling with your fingertips and gently pull it up and towards yous. You may need to start at 1 corner, then the other, to break it free. You will likewise need to dorsum it out, as higher up, to get around the sharp angles along the reverse (back) border of the device.
Breaking that initial seal will sound horrible, and you may need to flex the plastic a little bit to get around the tabs that hold it downwardly, but it'southward been designed to let you to do this.
With the peak cowling off, the fan is exposed. As above, apply canned air to clean it out, and take special care to dust out any other intakes where dust could go trapped. Pop the cowling back on, and you're done.
If you're interested in other tips for the care and feeding of your PS4, bank check out our guide on changing out your thumbsticks on the DualShock 4.
Source: https://www.polygon.com/2018/7/31/17634946/how-to-clean-ps4-fan-slim-pro
Posted by: gardnersuchibiant.blogspot.com
0 Response to "How To Clean A Ps4 Fan Without Taking It Apart"
Post a Comment